CamoXtreme is a toyline with all Jurassic Park III repaints it was released in 2003, the story line was dinosaurs survived and thrived in different environments and evolved camoflouge. All the CamoXteme toys are difficult to acquire and were produced in low numbers. some which even remained unreleased
Arctic Spinosaurus & Stegosaurus
The miniature Stegosaurus is basically coloured in four layers. The lowest layer (the belly, throat, most of the lower jaw and underside of the tail) is painted light grey. Above that, the second layer is white, covering the legs, flanks and both sides of the tail. A number of grey spots and stripes adorns the white parts of the figure. The top layer is coloured black, covering the creature's back, upper jaw, top of the tail, and most notably, the plates and tail spikes. In-between the white and black parts of the Stegosaurus there's the final layer, an orange line on either flank of the figure, running from the neck to the end of the tail, ending just under the last set of plates. The eyes are yellow with black pupils and a black JP III logo can be found on its left back leg. The animal stands in an active posture, with its body bent and its tail dangerously sticking out, like it's defending itself from an aggressor.
That aggressor could be the Spinosaurus that completes this 2-pack. It stands in a walking posture, with its left leg posed forward and the left arm raised, its mouth opened as if roaring and the end of the tail bent pointing to the right. It sports a mostly light blue paint job, which gradually turns into black on the animal's back, neck and upper parts of the tail and head, and dark grey on its belly, throat, inner side of the legs and lower part of the tail. It has a row of orange stripes on either side of its sail. Its claws are painted black (something they did not bother to do with the Stegosaurus), and it has yellow eyes with black pupils, white teeth and the inside of the mouth is coloured bloody red. A black JP III logo is found on its right upper leg.
Desert Spinosaurus & Velociraptor
The Spinosaurus stands in a walking posture, with its left leg posed forward and the left arm raised, its mouth opened as if roaring and the end of the tail bent pointing to the right. It sports a mostly tan or beige paint job, which covers practically the entire underside of the figure, except for the second half of the tail, which is black, while the tan covers the upper part of the tail. The other top parts of the figure (back, neck, upper jaw, part of the sail) reverse this paint scheme and are black instead. This black colouring ends in bent triangular stripes over the figure's flanks. The sail is festively adorned with white and orange stripes: additional orange highlights are found on the creature's head around the eyes and nostrils, while the lower part of the eye sockets is white, with small yellow eyes. A black stripe runs around the lower jaw from one side of the jaw to the other, while the Spinosaurus has white teeth and the inside of its mouth is dark pink. A black JP III logo is found on its right upper leg. Its claws on both hands and feet are not painted.
The Velociraptor stands in a stalking pose, its right arm and leg stretched outward and its head raised upwards with its mouth open, as if it means to jump onto something. The tail is raised upwards and bent at the tip. Most of this figure is coloured bright yellow, while its back, most of its head, the larger part of the upper tail section and the claws on its feet are painted black. The claws on its hands remain unpainted though. A yellow stripe runs on each side of its face, while blue stripes run around the jaws. Its throat is also coloured blue. A series of six white spots runs over its back. The eye sockets are white, with fairly large orange eyes and cat like black pupils. The inside of its mouth is simply painted black but has white teeth, while a black JP III logo is located on its left upper leg.
Lava Tyrannosaurus rex & Velociraptor
The T-Rex stands in an aggressive posture, its head curved to the left and its arms outstretched as if attacking something. The tip of the tail is bent pointing upwards and to the left. The majority of this Tyrannosaurus figure is painted basic brown, while the belly, throat and base of the tail are coloured almost a yellow type of brown. A series of thick black stripes runs from the neck over the back and the first half of the tail, with additional black highlights on the head, also around the eyes and on the lower jaw, as well as near its knees and the back of the lower legs. On either side of the figure, a pair of long red stripes runs from the base of the neck almost to the end of the tail, while seven smaller red stripes are located on the upper legs. The facial area around its small yellow eyes is also painted red. The inside of the mouth is not painted, but the figure has white teeth, as well as black claws on both arms and feet and a white JP III logo on its left upper leg. Its feet are supported by extra small plastic bases in the same dominant brown colour, so it can stand on its legs more easily.
The Velociraptor stands in a stalking pose, its right arm and leg stretched outward and its head raised upwards with its mouth open, as if it means to jump onto something. The tail is raised upwards and bent leftwards at the tip. Most of this figure is coloured black, except for its throat and belly, which are painted reddish brown, and the very top part of the neck, back and base of the tail which is bright red and ends in a fork motif right above the cat like yellow eyes. The Raptor is equipped with a series of grey stripes, spots and dots of various sizes all over the black parts of its body. Both the claws and inside of the mouth are unpainted. The creature has white teeth and a white JP III logo on its left upper leg.
Swamp Spinosaurus & Tyrannosaurus rex
The T.rex stands in an aggressive posture, its head curved to the left and its arms outstretched as if attacking something. The tip of the tail is bent pointing upwards and to the left. The majority of this Tyrannosaurus figure is painted basic green, while the belly, throat and base of the tail are coloured beige. A series of thick dark green spots and dots are found all over its body in a seemingly random and asymmetrical pattern. On its snout and above the eyes the Rex sports red colouring. It has small yellow eyes and white teeth (inside of the mouth not painted), as well as black claws on both arms and feet and a white JP III logo on its left upper leg. Its feet are supported by extra small plastic bases in the same dominant green colour, so it can stand on its legs more easily.
The Spinosaurus is positioned in a crouching move, its right arm resting on the ground, possibly stalking potential prey. Its left arm is raised upwards and its mouth is opened wide. It too sports a paint job dominated by a single shade of green, while its sail features a darker green colour, which ends in a stripe running over its tail as well as smaller stripes running over the flanks and dots on the side of the upper part of its tail. Additionally this Spinosaurus has similar dark stripes on its lower arms and legs and the same colour is also found all over the head. Yellow colouring adorns the back of the head, while a single yellow stripe is found on each flank. The figure has white teeth (inside of the mouth not painted), small red eyes with yellow eye lids and a white JP III logo on its left upper leg. Its claws are not painted.
Arctic Tyrannosaurus rex
Like many of Hasbro's bigger dinosaur models, this figure doesn't stand in a neutral posture. It's posed in a bent position, head, arms and tail posed to its right, as if circling potential prey. Its predominant colour is white, which is found all over its body except for the upper part of the head, neck, back and tail. The latter three are coloured dark blue with stripes and spots running out of this colouring over its flanks, neck, upper legs and tail in a rugged, random pattern. Between the white and dark blue a hue of light blue is used to make it seem the white colouring gradually shifts toward the dark blue. This effect is also used on the lower legs. The upper jaw and face are painted light blue (in a darker shade near the nostrils), making this part of the head really stand out. At the back of the head it features a fiery orange spot while five small orange dots run over its snout. Around the eyes and along the upper jaw a series of darker blue spots is found. This Rex has orange eyes, beige teeth and the inside of the mouth (tongue and all) is coloured dark pink. Grey claws stick out of its toes and fingers. A black JP III logo is found on the upper right leg.
It has a large dino damage wound on the right flank, showing bones and red muscle tissue. Inside this wound a button is located: when pushed it activates a rather high pitched growl. A second button is placed on its throat. Pressing this button produces a fierce attack roar, and makes the jaws open.
This Spinosaurus features an overall reddish brown paint job with black stripes and shapes all over its body (most notably on the legs), while its underside (belly, base of the tail and throat) is painted beige. On the legs, especially around the feet, a darker shade of brown is mixed in, giving those parts of the animal a muddy feel. Most of the upper jaw and facial area, as well as the neck, tip of the tail and sail are coloured black. On the head, around the eyes and mouth, as well as on the sail, blue lines are found in a symmetrical pattern. The creature has small yellow eyes, white teeth and the inside of the mouth is painted pink. Its claws on both hands and feet are black, while a white JP III logo can be found on its left upper leg. A dino damage wound is located on the left flank, showing white bones and red muscle tissue. A small button is found in this wound: when pressed, the figure emits a high pitched shrieking snarl. Another button is located in the throat: pushing this button makes the mouth of the creature open and produces a vicious attack roar.
The Spinosaurus stands in a bent pose, as if stalking prey, or waiting to jump on its victim. The tail, which is rather short, is bent to the left, as is the head. The animal has large arms with very nasty big claws. The snout is quite elongated and resembles a crocodile's head. The figure is very thin and has little body mass. It's also out of proportion: the head and especially the arms are too big compared to the body.
This dark Raptor figure stands in a dramatic pose when boxed, showing all its primal predator prowess, with its body straight upwards, its legs wide apart and its ferocious claws ready for battle action, while its head faces upward and looks to the right, jaws wide open (they can't be closed though). The tail is bent in a sort of 'S' shaped fashion. This sculpt has proto-feathers on the back of its head, following the design change of the JP III Raptors. Accordingly, it has two nasal ridges on each side of its head. A dino damage wound is located on the upper base of the tail, revealing some of its tail bones and dark red muscle tissue. Inside the wound a button is found: when pressed this produces an aggravated shriek. On its back this creature has a small lever, activating the slashing claws. This also produces a snarling sound.
The predominant colour of this critter is very dark grey, almost black in fact. It covers the figure's entire body. It is adorned with grey stripes on both arms and legs. It also has a grey stripe running from the snout all the way to the tip of the tail, which also covers the lever on its back, while it's split in two around the feathers on the back of the head. Along this main back stripe, a thinner red stripe follows its entire trajectory on either side. Additional grey spots are applied around the nasal ridges, while smaller red stripes are located on the facial ridges and the top of the proto-feathers. The animal has black claws on both its fingers and toes. It has rather large feet. The inside of the mouth is pink, with beige teeth. On its right upper leg it has a black white logo. This Raptor has green eyes, and around these three circles in black, red and grey are found.
Ultra Canyon Tyrannosaurus rex
This larger T.rex figure measures some 25 centimetres in length and stands just over 15 centimetres tall. It's posed in an attack posture, with its tail bent upwards and pointing to the left and its head slightly tilted up, as if it were looking at something just above him. Its legs stand far apart from each other. This Rex is pretty skinny and has a small body, it's mostly head, limbs and tail. A very large dino damage would is found on its right flank, showing ribs and red muscle tissue. The upper piece of exposed tissue is actually a button which activates a shrieking roar, as if the creature is in pain. A second roar, more aggressive and imposing, can be made by pulling its right arm down: when doing so the mouth will also open. A third sound can be made by having the T-Rex stomp on the ground: logically this is called a stomping noise on the box, though it could also serve as a crash sound. The quality of all three sounds is not very good, since static is heard as well. The two roars are the same sounds the Arctic T-Rex figure produces.
This figure features an intricate paint job. Most of the top and lower part of the body (back, upper part of the tail, neck, back of the head, lower jaw, arms, most of the legs, belly, throat and lower part of the tail) are coloured grey, with this colour being somewhat darker on the torso. In between the lower and upper parts of grey, black colouring is applied, which for the most part gradually shifts into grey in the figure's lower regions (especially noticeable on the legs and flanks), while a similar effect is achieved by black spots on the throat. Most of the face and upper jaw is also black, with a series of white dots running around the upper jaws, facial ridges, snout and eyes. From the snout to the tip of the tail a row of black spots runs over the figure's top parts, each spot encircled by an orange line. These spots get increasingly bigger towards the centre of the figure, with the biggest spot located right above the legs, and diminishing from that point on. In a similar fashion, orange spots with black lines around them are found on both legs. A fairly small white JP III logo is located on its right upper leg. Rex has got a pair of small yellow eyes and the claws on both hands and feet are all painted
Jungle Spinosaurus & Tyrannosaurus rex
This two-pack is particular, since a handful were sold on eBay back in 2002, and then they disappeared all of a sudden, never to be seen anywhere again. It can be noted that the Spinosaurus paint job is very similar to the bigger electronic Jungle Spinosaurus, but the T-Rex sports a pretty strange, cow-like paint job.
This repaint of the Aqua Spinosaurus is considered as on of the rarest Jurassic Park toys ever, since only one sample (a boxed one) has ever been found, as far as we know. It apparently was supposed to be released along with a few other pieces as part of a second wave of CamoXtreme toys, but sadly, it never happened. It is more than probable that more than one sample exist, though, since the one sold on eBay seems to have been found at a Hasbro employee store, which shows that it was very close from being released.
Months after the appearance of the Desert Spinosaurus on eBay, the seller revealed a picture of the back of this toy, which pictured 2 previously-unknown unreleased CamoXtreme dinosaurs. One of them was the Lava Pteranodon, a new reddish repaint of the electronic Pteranodon from the JP/// toy line. From what we can make out of the tiny picture of this figure, it was to have a paint job pretty similar to the small Lava T-Rex one.
The second previously unknown dinosaur pictured at the back of the Desert Spino card. The greenish paint job was pretty interesting, and is a bit similar, although much brighter, to the Alpha Velociraptor (from the JP/// toy line) repaint from the JP: Dinosaurs 3 line released in 2005. Most people think it's just a mere coincidence.