Jurassic Park Wiki
Register
Advertisement
492

For the first Jurassic Park film, a number of hydraulically controlled animatronics, puppets, and elaborate costuming was created by Stan Winston Studios to be used to represent the films’ three main antagonist dinosaurs. Along with a single, fully animatronic rig, an animatronic head for close-up shots, a stand in puppet used as a stand-in for later CGI insertion, a pair of mechanized wearable legs for shots of the feet, and two full body suits were crafted for the film’s production.

Design[]

Tumblr mo7r2mz9L81rsiohpo2 1280

The Velociraptors were designed together by Stan Winston Studios artist Mark “Crash” McCreery, and paleontographer Dr. Mark Hallett, who based their designs off of Deinonychus antirrhopus, a North American relative of Velociraptor. Recruited by John Rosengrant, Dr. Hallett joined Mark McCreery in the early summer of 1990. McCreery had already been working with other paleontologist consultants such as Dr. Robert Bakker, and Gregory S. Paul. It was because of Gregory Paul’s consultation that the nomenclature of the Jurassic Park Raptors is what it is. Gregory Paul had classified Deinonychus antirrhopus as well as other species of dromaeosaur all under the genus of “Velociraptor” due to his belief that the reconstructions of the Deinonychus skull at his time were incorrect (this later proved to be true, as

3d12content jurassic park-046

Deinonychus‘ skull is currently believed to be closer to Velociraptor than to allosaurids, as it was first reconstructed). Soon after the designs were drawn, despite protest from the paleontology consultants, the idea of feathers over the Raptors was dropped due to design difficulties. It was after the designing and construction of the Raptor effects that the scientific description of Utahraptor ostrommaysorum was made public, baffling Stan Winston, who was quoted saying, “Later, after we had designed and built the Raptor, there was a discovery of a Raptor skeleton in Utah, which they labeled ‘super-slasher’. They had uncovered the largest Velociraptor to date – and it measured five-and-a-half-feet tall, just like ours. So we designed it, we built it, and then they discovered it.”

Go-Motion Models[]

1057845986 47189b6e89

Prior to being suggested of ILM’s computer effects, director Steven Spielberg originally wished to use Phil Tippett’s go-motion effects to effectively flesh out longer full body movements for the films dinosaurs. However, once Spielberg chose ILM over Tippett’s go-motion, Tippet believed he was out of a job. Instead, Spielberg kept Tippett on the project. Tippett worked closely with both ILM and Stan Winston Studios, the latter of which, Tippett worked on a poseable full-scale model that helped ILM visualize the shots where they would later be inserting CGI dinosaurs during post production.

Full-Sized Animatronic Raptor[]

RaptorRig

Of the multitude of effects used to bring the Raptors to life was a full sized Raptor animatronic, constructed by Chris Swift. Measuring six feet tall and eleven feet long, the animatronic was fully mechanized, powered by cables that ran from beneath it. It was used primarily for long shots, and was designed for shots if the Raptor where it was giving quick, fluid movements. It took a total of fourteen puppeteers beneath an enclosed stage to effectively operate the mechanical puppets.

Walking Rig[]

Scan Pic0005

The other mechanical rig constructed by Swift was the walking rig. A mixture of costume and animatronic, the rig was a construction of the Raptor’s midsection, from the legs to the underside of the torso, and arms. The rig was based on the walking mechanism designed for the Dilophosaurus puppet. The walking motion was created by a human wearer, but moved through mechanics. The arms were radio controlled, and the large sickle-clawed toe was cable operated. The feet had an internal platform lifting the operator, but were weighed to give the operator a sense of where they were going. The person inside the suit (who was John Rosengrant) had to be assisted by the other puppeteers to move forward.

Costumes[]

John Rosengrant designed and built two identical, partially mechanical, Raptor suits for use on set. The arms were a mixture of cable and radio control, and the legs were triple jointed, forcing the operator to have to stand on toe-tip. The heads were mechanical, with radio operated eye movement. Like the other animatronics built by Stan Winston Studios for Jurassic Park, the skin on the costumes was made of foam rubber.

Baby Raptor Animatronic[]

Also constructed was a tiny Raptor puppet for the scene in which the actors would gawk in amazement as the tiny creature poked her snout out of an artificial egg. Miniaturized robotics were used to move the rib cage in order to produce a simulated breathing effect, while cables were used to move the arms and legs. A single rod inserted beneath the tiny puppet gave movement to its entire body.

Raptors in the Kitchen[]

Kitchenraptor

Among the most famous of the scenes in the movie was also the scene where the most extensive use of the Raptor costumes was made. John Rosengrant and Mark McCreery donned the Raptor suits for many of the shots, Rosengrant himself being in the suit for the infamous door opening shot. Many other of the practical Raptor effects were utilized in the scene, meaning very few shots in the scene had to be constructed through CGI.

Sound Design[]

The Raptors of Jurassic Park had the most complex sound designs of all the animals in the film. Samples from various birds such as cranes and geese, and various animals such as dolphins, walrus, tortoises, and horses, and the add in from human vocals, the sound effects gave the Velociraptors a language of their own. Dolphins and walrus made up the base of the big dinosaurs famous screech, with horse sounds thrown into the mix for variation. Tortoises mating made up the base of the Velociraptors bark when calling to one another and by geese, walrus and chimpanzees in their idle or snapping barks. The ferocious growl of the Velociraptors were made from Tigers and Spielberg's Jackson Terrier (whom which surprisingly would be used again for the sounds of the T. rex in the Gallimimus scene). The large vibrating bellow of the Velociraptors was the provided sounds from Frank Welker, whom Rydstrom called in to provide them with a unique sound never heard before. The sounds also were mixed rigorously to create hoots, cackles, roars, snarls, and hisses. These sound effects largely contributed to the reptilian feel that was used in the portrayal of the villains of the first film.

Advertisement